Saab 93 Key Fob Replacement
Saab key fobs with 93 keys can be expensive to replace. However the procedure is easy.
All you need is a flathead screwdriver, and some patience. Place the screwdriver in the middle of the case and then slowly open it.
It is a good idea to have spare fobs and keys. You can avoid being stranded and having to pay towing fees.
How to Replace the Battery
All car key fobs that lock and unlock your vehicle remotely are powered by a battery which will eventually fail. In a few simple steps, owners can easily replace the key fob's battery. The key fob has two plastic flaps on one side that must be open in order to take out the battery that was in use and replace it with a new one. The standard CR1632 battery is used as a replacement. It is easy to install.
Once the emergency key has been removed then you can use a small flathead screwdriver to cut the case of the remote fob. Be careful not pushing it too hard, since the components inside are delicate and could be damaged when you apply too much pressure.
Saab created some incredible automobiles, and a lot of them remain in the globe today. One of the biggest issues with these cars is their ignition keys. They're not durable, and the keys can become sticky or break off in time. If a Saab owner loses only one functioning key, it could be costly to purchase an additional key at the dealership, since they must replace the entire computer module, and then program it to the new key to convince the vehicle you are not trying to steal it. You can save a lot by replacing the case.
How do you remove the manual key?
G28 Car Keys that lock and unlock a car are powered by batteries, and those batteries do have a lifespan. If you're like many people, it will eventually go out. It's simple to replace the manual key fob batteries. The only difficult part of the procedure is taking out the old battery from the case. With a bit of patience and a flathead screwscrewdriver, you can accomplish the task.
Once you have the new battery installed, it's time to put everything back together. You'll need a flathead screwdriver to unlock the replacement case of the key fob. Insert the screwdriver into the slot in the middle. Work the case gently until it splits open and you can take it off of the key fob.
You may have to reprogram the new key fob if the previous key fob has lost its connection to the car's security system. This can be done using the manual learning procedure for adding a brand new FOB to your 2010 Saab 9-5. This method does not invalidate previous learned keys. You can still use the same FOBs that you have, if you want to program them again. This process can only be initiated when the mechanical key of the vehicle matches the cut on the FOB.
How do you change the case
It's a good idea replace both the case as well as the battery when changing the manual key or the battery. These cases tend to get worn out quickly, especially after long-term use. Removing the case from your SAAB 9-3 can be quite simple and you don't require any special tools perform the task.
The first step in removing the case is to remove the manual key from the fob. It is done by pressing the blue SAAB logo on the fob and then pulling the manual key out. The key fob may be sticky sometimes, so it may take a little bit of force to take the key out.
After you've removed the manual key from the case, you are able to begin removing the electronic components. To do this, you'll require an inexpensive flathead screwdriver. Use a gentle screwdriver to avoid damage any electronics. Once you've removed all electronic components, you can begin working on removing the battery. Once you've replaced the battery, you can place everything back in a brand new case. You can buy cases online at a very low price.
How do you program the new key?
All key fobs, which allow you to lock or unlock your vehicle remotely, have batteries. However they are limited in their life span. It is important to remember this and replace the battery in your key fob every three or four years. Fortunately, this is an easy process that can be accomplished at home. All you need is a small flathead screwdriver, and a bit of patience.
The first step is removing the manual key. This can be done by pressing the blue SAAB logo on the key fob, then pulling the emergency key out. It may take some force however, the key should come out easily. After you've opened the key fob, you are able to remove the battery by gently pressing the screwdriver in the slot that is in the middle. This will split the case and make it easier to get at the electronics.
It is now time to program the key. You can do this by following the instructions in this video posted by YouTube user Cyclone Cyd. This channel gives excellent instructions on how to perform simple repairs and maintenance on cars.
A key fob can be an excellent way to keep an additional car key in the event that you break or lose your original. You can purchase a new key fob online or at the local locksmith shop, such as United Locksmith. The cost is lower than if you purchase the key from a dealership. They will charge you for the key and then program it into your car.